[SOLVED] PC Build and Manual

You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided in LabSim 14.1 and for the Video Card only, use information in LabSim 3.12: “Build a Computer from Scratch.” The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using IEEE citation style, with screenshots of each step from LabSim 14.1 and for Video Cards only, use LabSim 3.12. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car. Note carefully how in this example, not only is each step described individually, and in detail, but also there is a visual representation of each step. You should model your submission along the same lines. Keep in mind that your manual will be used as a guide for new technicians. The manual should not document how to complete a LabSim section; rather, it should provide detailed instructions on how to build an actual computer for a potential customer: “Drag the motherboard from the shelf to the motherboard plate in the system case.” “After properly grounding yourself, pick up the motherboard and place it inside the area where the motherboard will sit in the case. Align the screw holes on the motherboard with the screw holes on the case. Use appropriate screws to mount the motherboard inside the case, making sure not to scratch the surface of the motherboard.” ***LabSim Product to use: TestOut PC Pro ***LabSim login – Username: tgmaverick515  Password: Stlo1945! PC Build & Manual Part 1: 1. Workspace Preparation (LabSim 2.0) 2. Installing Motherboard (LabSim 3.3) 3. Installing Power Supply (LabSim 3.2) 4. Installing CPU (LabSim 3.5) 5. Installing RAM (LabSim 3.7/3.8)